Yi Sika is double-faced big feed 04 milling cutter

  • Time:
  • Click:107
  • source:FARSUN CNC Machining
Two years ago, ISCAR rolled out the series of H600 milling cutter of special economy, clip is held double-faced, razor blade of big feed mill. Most the razor blade that releases first is H600 WXCU 0806.

.

.

, use at the milling cutter of diametical limits 50-125 Mm. The H600 WXCU 05T3 of a bit small norms.

.

.

Bit, use at the milling cutter of diametical limits 25-52 Mm. Today's ISCAR, recommend the H600 WXCU 0403 with smaller norms for you.

.

.

.

Bit, use at the milling cutter of diametical limits 16-20mm. So far, series of milling cutter of double-faced big feed covers HELIDO UPFEED diametical limits 16-125 Mm. All H600 WXCU 04, 05, 08... bit all is made to grind. The FF EWX of diametical limits 16-20 Mm... - 04 establish milling cutter, have straight power, cut Ping Bing, interface of MULTI-MASTER T whorl, the join form that FLEXFIT module type receives a power and all sorts of length norms. Milling cutter tool cutting edge angle is 17 ° , action of axial of edge of cutting join forces at main shaft. Cutting tool design ensured tall stability, even if application is extended at be being hanged greatly, also can realize high speed feed. Additional, h600 WXCU 0403... knife reel is held within wedge knife chamfer, clip is held quite firm. Bit alloy brand rolls out for 2007-2008 Ji Xin, the SUMO TEC (of banner science and technology bundle demon technology) . Union is different before horn can use what differ in order to machine to be machined material, apply to different treatment application. HELIDO-UPFEED milling cutter all cools inside the belt aperture. Apply Yu Dajin to give milling to its, slope visits mill, insert mill, when helix feed means very important, performance is more superior, cutting tool life is longer. Should apply at mould industry, treatment is narrow model when antrum, this cutting tool particularly applicable. CNC Milling